How Do I Reset My Lux Thermostat as the Flame is Blinking

How Do I Reset My Lux Thermostat as the Flame is Blinking

Before starting the resetting process, you have to identify the cause behind why the flame is blinking. First things first, check if there’s a software bug or anything similar. You can do so by checking on the manufacturer’s website, where they usually post updates.

Once you’re convinced that it has nothing to do with the software, you have yourself a hardware issue. However, you should not panic at this stage as none of the issues stay after a reset. Here’s how you can reset your lux thermostat when the flame starts to blink.

The Reason behind Blinking the Flame of a Thermostat  

Before resetting your lux thermostat, you have to know why the flashes of your thermostat blink. When your thermostat keeps blinking during the general operation, it typically means something is wrong with the external portion of the system.  

How Do I Reset My Lux Thermostat as the Flame is Blinking

Generally, when the compressor is locked, the flame icon on your thermostat flashes. And, this locked compressor has shut itself down and sent a signal to the thermostat to let it know there’s an issue. 

Sometimes, the indoor unit continues to run as it may not be aware of this problem in the first place. Apart from that, it can occur as a result of power loss or interruption. 

The Ways of Resetting Lux Thermostat 

When you reset your thermostat, it means you are referring it back to its factory settings. Usually, doing so can solve both software and hardware issues. Therefore, you can try resetting to resolve matters related to the application, your HVAC system, or thermostat connection issues.  

It is best to read the manual and follow each step carefully before resetting the thermostat. Otherwise, you may alter any of the core settings required for the proper running of the device. But if you do not have your manual nearby, there are a lot of online articles and videos that can help you through the process.

If you cannot identify the reason behind blinking, first try to reset the hardware. The reason is hardware reset does not erase custom program settings while software reset does. And then, if the hardware reset cannot solve the issues, go for a software reset instead.

Hardware Reset 

At first, take the front of the thermostat off the wall and look for a small white round reset button. You can find it easily as it is labeled as “H.W. Reset” on the right side. After locating the reset button, press it down and hold for at least five seconds. The screen should then populate temporarily. And after some time, the system should automatically eliminate any errors.  

Yet, if the reset process does not solve the problem, the only option that remains is a software reset.  

Hardware Reset

Software Reset 

The steps of software resetting will erase the custom program settings. So, to avoid hazards, note down all the temperatures. And after resetting, start times before you operate the machine again. 

Unlike the hardware reset key, the button for software resetting is on the left side. You can find it easily by looking for the label “S. Reset”. Upon finding the button, press it down and hold for five seconds. The screen may fully populate for some time and remain like that until the device is ready. 

After the complete resetting process, the date and time will remain correct. But you have to re-enter all your custom program values.  

Software Reset

Frequently Asked Questions 

Where is the reset button on a thermostat? 

A thermostat usually has two reset buttons, one for hardware reset and the other for software reset. They reside on either side of the thermostat. The button for hardware reset is on the right side of the thermostat. On the contrary, the software reset button is on the left side.

How do you override thermostat settings? 

Pressing the temperature adjustment button will allow you to override the current temperature values for the program’s runtime. After that, you can adjust the temperature according to your needs. 

Conclusion 

If your thermostat is behaving erratically with the flame icon blinking, it’s essential to assess and address the issue promptly. The blinking often signifies a problem with the external portion of your HVAC system, and resetting the thermostat can often correct the problem. Utilizing the system mode switch and following the correct reset procedures—whether it’s a hardware reset involving the circuit board or a simple software reset—can restore normal functionality. Remember, resetting your thermostat by removing batteries or pressing reset buttons can often bring back the desired settings without eroding pre-set programs.

It’s crucial to recognize that when your thermostat is behaving erratically or doing something strange, it’s not just about pressing reset buttons. A thorough understanding of the underlying causes, be it a hardware malfunction or a software glitch, is vital. By methodically following the reset steps, whether it’s a system mode switch adjustment or a more intricate circuit board intervention, you can ensure the longevity and efficiency of your thermostat. Regular maintenance and timely resets not only prolong the life of your thermostat but also ensure that your home remains a comfortable haven.

Remember, a little attention to your thermostat’s quirks can save you from more significant issues down the line.

Also, read about the reasons and fixes of LED Flood Light flashing.

Similar Posts